0.96'' 128×64 OLED with SSD1315Z IC, 30PIN, 3/4wire serial interface, I2C

SCE096009-V01 is a OLED Display with COG Type, 128×64 Resolution, SSD1315Z IC, 3/4wire serial interface, I2C, 30PIN
  • model no.:

    SCE096009-V01
  • Size (inch)size (inch):

    0.96''
  • Resolution:

    128×64
  • Outline Dimension (mm):

    24.74x16.90x1.42
  • Viewing Area (mm):

    22.74x11.86
  • Active Area (mm):

    21.74x10.86
  • Interface:

    I2C// 3/4-wire SPI
  • IC Part No.:

    SSD1315Z
  • Color:

    Monochrome (White)
  • PIN:

    30
  • FPC type:

    Soldering
  • Product Detail


Basic Information


Display Color:               White
Dot Matrix:                    128×64
Drive IC:                        SSD1315Z
Viewing Angle:              160°
Aperture rate:                78%
Interface:                       3/4wire serial interface, I2C
Outline Dimension:        24.74(W)x16.9(H)x1.42(D)
View area:                      22.74 (W) x 11.86(H)
PIN:                                30
FPC Type:                      Soldering



Drawing





General Specification


ITEM SPECIFICATIONS  UNIT
  MODULE SIZE 24.74(W)x16.9(H)x1.42(D) mm
  VIEWING AREA 22.74 (W) x 11.86(H) mm
  ACTIVE AREA 21.74 (W) x10.86(H) mm
  DOT SIZE 0.15(W) x0.15(H) mm
  DOT PITCH 0.17(W) x0.17 (H) mm
  ASSY.TYPE COG ---
  WEIGHT TBD





Interface Definition



PIN NO. SYMBOL TYPE FUNCTION DESCRIPTIONS
1 NC(GND) P It should be connected to external ground.
2 C2P
C1P/C1N-Pin for charge pump capacitor.
C2P/C2N-Pin for charge pump capacitor.
Connect to each other with a capacitor. They must be floated when the
Charge pump not use.
3 C2N
4 C1P I
5 C1N
6 VBAT P Power supply for charge pump regulator circuit.
It must be connected to external source when charge pump is used. It must be float when charge pump is not used.
7 NC
NC
8 VSS P Ground pin. It must be connected to external ground.
9 VDD P Power pin for logic circuit. It must be connected to external source.
10 BS0 I

Interface selection pins.


11 BS1
12 NC
NC.
13 CS# I Chip Select input pin. Active "L"
14 RES# I Hardware reset input pin. Active "L".
15 D/C# I This is Data/Command control pin.
When the pin is pulled HIGH, the data at D[7:0]  is data. When the pin is pulled LOW, the data at D[7:0] is command. In I2C mode, this pin acts as SA0 for slave address section.
When 3-wire serial interface is selected, this pin must be connected to VSS
16 NC
NC.
17 NC
NC.
18 D0 I/O When serial interface mode is selected,D2 should be either tied LOW or tied together with D1 as the serial data input: SDIN, and D0 will be the serial clock input: SCLK.
When I2C mode is selected, D2, D1 should be tied together and serve as SDA and D0
is the serial clock input, SCL.
19 D1
20 D2
22 NC
NC.
23 NC
NC.
24 NC
NC.
25 NC
NC.
26 IREF I Current reference for brightness adjustment.
This is segment output current reference pin. A resistor should be connected between this pin and VSS .Set the current at 12.5 uA maximum.
27 VCOMH O COM signal deselected voltage level.
A capacitor should be connected between this pin and VSS.
28 VCC P Power supply for OLED driving voltage. A capacitor should be connected between this pin and VSS, when charge pump is used.
It must be connected to external source when charge pump is not used.

29 VLSS P This is an analog ground pin. It should be connected to VSS externally.
30 NC(GND) P It should be connected to external ground.

Send A Message
If you have questions or suggestions, please leave us a message,we will reply you as soon as we can!
related products
0.49'' OLED Display Module

0.49'' Graphic COG OLED LCD Display with 64×32 Resolution

SCE049001-V01 is a OLED Display with COG Type, 64×32 Resolution, SSD1306BZ IC,14PIN
0.66'' OLED display

0.66 inch OLED Display with 64×48 Resolution SSD1306BZ IC, 30PIN

SCE066001-V03 is a OLED Display with COG Type, 64×48 Resolution, SSD1306BZ IC, 6800/8080 interface 4 wire serial interface I2C, 30PIN
0.42'' OLED

0.42'' OLED Graphic LCD Display with I2C interface

SCE042001-V01 is a OLED Display with COG Type, 72×40 Resolution, SSD1306BZ IC, 4-wire serial interface I2C,16PIN
OLED display module

0.66'' OLED Graphic LCD Display with 64×48 Resolution SSD1306BZ IC, 28PIN

SCE066001-V01 is a OLED Display with COG Type, 72×40 Resolution, SSD1306BZ IC, 6800/8080 interface 4 wire serial interface I2C, 28PIN
1.4'' OLED SCREEN

1.4'' Round OLED for smart watch with 454*454 resolution RM69330 IC, 24PIN, MIPI/SPI interface

SCE140001-V01 is a Round OLED Display with COG Type, 454*454 Resolution, RM69330 IC, MIPI/SPI interface, 24 PIN
0.69'' OLED

0.69'' OLED Graphic LCD Display with 96×16 Resolution SSD1306BZ IC, 14PIN

SCE069001-V01 is a OLED Display with COG Type, 96×16 Resolution, SSD1306BZ IC, interface I2C, 14PIN
0.87'' OLED

0.87'' OLED Graphic Display with 128×32 Resolution SSD1316Z IC,15PIN, 4-wire SPI interface

SCE087001-V01 is a OLED Display with COG Type, 128×32 Resolution, SSD1306Z IC, 4-wire SPI interface, 15PIN
0.91'' OLED

0.91'' OLED Graphic Display with 128×32 Resolution SSD1316BZ IC,14PIN, I2C interface

SCE091001-V01 is a OLED Display with COG Type, 128×32 Resolution, SSD1306BZ IC, I2C interface, 14PIN
leave a message
welcome to sinocrystal
If you have questions or suggestions, please leave us a message,we will reply you as soon as we can!

Home

Products

about

contact