0.96'' Vertical 64x128 OLED display with SH1107 IC, 13PIN, 4wire serial interface, I2C

SCE096013-V01 is a Vertical OLED Display with COG Type, 64x128 Resolution, SH1107 IC, 4wire serial interface, I2C, 13PIN
  • model no.:

    SCE096013-V01
  • Size (inch)size (inch):

    0.96''
  • Resolution:

    64×128
  • Outline Dimension (mm):

    14×28×1.227
  • Viewing Area (mm):

    11.86×22.74
  • Active Area (mm):

    10.86×21.74
  • Interface:

    I2C/ 4-wire SPI
  • IC Part No.:

    SH1107
  • Color:

    Monochrome (White)
  • PIN:

    13
  • FPC type:

    Soldering
  • Product Detail



Basic Information


Display Color:               White
Dot Matrix:                    64X128
Drive IC:                        SH1107
Viewing Angle:              160°

Aperture rate:                78%
Interface:                       4wire serial interface, I2C
Outline Dimension:        14.0(W)x28.0(H)x1.227(D)
View area:                      11.86 (W) x 22.74(H)
PIN:                                13
FPC Type:                      Soldering




Drawing






General Specification


ITEM SPECIFICATIONS  UNIT
  MODULE SIZE 14.0(W)x28.0(H)x1.227(D) mm
  VIEWING AREA 11.86 (W) x 22.74(H) mm
 ACTIVE AREA 10.86 (W) x 21.74(H) mm
  DOT SIZE 0.15(W) x0.15(H) mm
  DOT PITCH 0.17(W) x0.17 (H) mm
  ASSY.TYPE COG ---
  WEIGHT TBD




Interface Definition


PIN NO. SYMBOL TYPE FUNCTION DESCRIPTIONS
1 NC
NC
2 VPP P Power supply for OLED driving voltage. This is the most positive voltage
supply pad of the chip. It should be supplied externally.
3 VCOMH O This is a pad for the voltage output high level for common signals.
A capacitor should be connected between this pad and VSS.
4 VDD P Power pin for logic circuit. It must be connected to external source.
5 IM1 I

Interface selection pins.

6 IREF I Current reference for brightness adjustment.
This is segment output current reference pin.
A resistor should be connected between this pin and VSS .
Set the current at 15.625 uA maximum.
7 CS I Chip Select input pin. Active "L"
8 RES I Hardware reset input pin. Active "L".
9 A0 I This pin is Data/Command control pin.
When the pin is pulled HIGH, the data at D[7:0]  is data.
When the pin is pulled LOW, the data at D[7:0] is command.
In I2C mode, this pin acts as SA0 for slave address section.
10 D0 I/O When the serial interface is selected, then D0 serves as the serial clock input pad (SCL) and D1 serves as the serial data input pad (SI).
When the I2C interface is selected, then D0 serves as the serial clock input
pad (SCL) and D1 serves as the serial data input pad (SDA).
11 D1
12 VSS P Ground pin. It must be connected to external ground.
13 NC
NC


Send A Message
If you have questions or suggestions, please leave us a message,we will reply you as soon as we can!
related products
0.49'' OLED Display Module

0.49'' Graphic COG OLED LCD Display with 64×32 Resolution

SCE049001-V01 is a OLED Display with COG Type, 64×32 Resolution, SSD1306BZ IC,14PIN
0.66'' OLED display

0.66 inch OLED Display with 64×48 Resolution SSD1306BZ IC, 30PIN

SCE066001-V03 is a OLED Display with COG Type, 64×48 Resolution, SSD1306BZ IC, 6800/8080 interface 4 wire serial interface I2C, 30PIN
0.42'' OLED

0.42'' OLED Graphic LCD Display with I2C interface

SCE042001-V01 is a OLED Display with COG Type, 72×40 Resolution, SSD1306BZ IC, 4-wire serial interface I2C,16PIN
OLED display module

0.66'' OLED Graphic LCD Display with 64×48 Resolution SSD1306BZ IC, 28PIN

SCE066001-V01 is a OLED Display with COG Type, 72×40 Resolution, SSD1306BZ IC, 6800/8080 interface 4 wire serial interface I2C, 28PIN
1.4'' OLED SCREEN

1.4'' Round OLED for smart watch with 454*454 resolution RM69330 IC, 24PIN, MIPI/SPI interface

SCE140001-V01 is a Round OLED Display with COG Type, 454*454 Resolution, RM69330 IC, MIPI/SPI interface, 24 PIN
0.69'' OLED

0.69'' OLED Graphic LCD Display with 96×16 Resolution SSD1306BZ IC, 14PIN

SCE069001-V01 is a OLED Display with COG Type, 96×16 Resolution, SSD1306BZ IC, interface I2C, 14PIN
0.87'' OLED

0.87'' OLED Graphic Display with 128×32 Resolution SSD1316Z IC,15PIN, 4-wire SPI interface

SCE087001-V01 is a OLED Display with COG Type, 128×32 Resolution, SSD1306Z IC, 4-wire SPI interface, 15PIN
0.91'' OLED

0.91'' OLED Graphic Display with 128×32 Resolution SSD1316BZ IC,14PIN, I2C interface

SCE091001-V01 is a OLED Display with COG Type, 128×32 Resolution, SSD1306BZ IC, I2C interface, 14PIN
leave a message
welcome to sinocrystal
If you have questions or suggestions, please leave us a message,we will reply you as soon as we can!

Home

Products

about

contact